Regenerative Desiccant Dryers

Working Principle
Waste heat regeneration compressed air dryer is a type of absoption drying agent made by the technique that adopts the heat exhausted by high  pressure machine in hgih  temperature to directly heat the drying agent and to regenerate it.It avoids  shortcomings of heatless regeneration compressed air dryer which are short switching     time and large amount of regeneration gas consumption and overcomes disadvantages of heat regeneration compressed air drying agen which is large amount of power consumption.Waste heat regeneration compressed air dryer consumes no gas and with low energy  consumption in generation,which is a new type of energy-saving equipment.

Technical Indexes
Air inlet temperature               110~150ºC
Air inlet pressure                     0.6~1.0MPa
Regeneration Air Consumption Amount              ≤ 1%
Pressure  Loss                          3%          of inlet pressure
Inlet Oil Content                         ≤ 0.1PPM
Outlet Dew Point                      standard  From - 20 ºC
Cooling Water inlet temperautre             ≤ 32ºC
Cooling Water inlet pressure                   0.2~0.4MPa
Cooling Water                            Industrial Circulating Water
Woriking Mode                           Two absorption towers work alternately and continuously
Control   Mode                             PLC control
Regeneration Way                     Regeneration of compression heat
Cycle                                           T   = 4~8 ( h )
Installation Method                       Indoor,without basic installation

Product Featrues
Continuous Air Supply

Adopt unique measures to ensure that there isn't gas stop when absorption tower is changed,and at the same time it can avoid inpact of instant airflow toward adsorbing agent.
Special Design for Absorption Tower

Adopt special reflecting structure at the bottom of absorption tower and fill absorbing agent with the use of special filling method,which can put an end to generatio n of tunnel effect and mutual friction between absorbing agents.
Adopt World-brand Products to Ensure Stable Operation

Adopt word-brand control valve and cutout valve,so that it has great guarantee in use quality and safe reliability.
Adopt High-performance Oil and Dust Removal Filter

Adopt customized absorbing agent,whose performance is accepted by the industry.
High-performance Rear Cooler
High-efficiency rear cooler can reduce compressed air with high temperature to below designed temperature,so as to ensure high efficiency and reliable operation of complete machine.

Control Parts
Standard Configuration
a.Work cycle is 4~8h
b.Adopt PCL control valve for changing ove

Opitional Configuration
a.Heater device
b.Dew-point Meter
c.Remote Control
d.DPOS Dew-point Energy- saving System


Model
Nominal volume capacity(Nm³/min)
Power supply V/HP/Hz
Rated power W
Regeneration gas consumption amount(Nm³/min)
The maximum cooling water amount t/h
Air mouth-piece diameter mm
Overall dimensions
Weight
kg
Length
Width
Height
TY-100
100
220V/1HP/50HZ
200
1%or0%
35
DN150
3100
2050
2755
5000
TY-150
150
220V/1HP/50HZ
200
1%or0%
55
DN200
4350
2650
2975
8000
TY-180
180
220V/1HP/50HZ
200
1%or0%
63
DN200
4500
2750
3000
9400
TY-200
200
220V/1HP/50HZ
200
1%or0%
70
DN200
4680
2850
3100
10600
TY-250
250
220V/1HP/50HZ
200
1%or0%
90
DN250
4750
2900
3385
14000
TY-300
300
220V/1HP/50HZ
200
1%or0%
110
DN250
4950
2950
3690
16500
TY-350
350
220V/1HP/50HZ
200
1%or0%
128
DN300
5100
3200
3900
18100
TY-400
400
220V/1HP/50HZ
200
1%or0%
140
DN300
5300
3385
4000
23000
TY-500
500
220V/1HP/50HZ
200
1%or0%
180
DN350
6000
3800
4450
28000